Simple Guide to Fixing a Leaky Faucet

Tools and Materials:

• Adjustable wrench
• Screwdriver
• Replacement washers and O-rings (if necessary)
• Cloth or towel
• Plumber’s tape

Steps:

1. Identify the Type of Faucet: Determine the type of your faucet: compression (two handles) or cartridge, ball, or disc (single handle).
2. Turn Off Water Supply: Shut off the water supply to your faucet. This is usually done by turning the valves under the sink clockwise.
3. Plug the Drain: Plug the sink drain to prevent small parts from falling in.
4. Remove Faucet Handle: Remove the handle by unscrewing a screw on the top or back. For lever-type handles, remove a decorative cap to access the screw.
5. Remove the Valve or Cartridge: For a compression faucet, use an adjustable wrench to unscrew the nut and remove the valve. For other types, remove the cartridge or ball assembly.
6. Inspect and Replace Damaged Parts: Check the valve or cartridge and replace any worn washers or O-rings.
7. Reassemble the Faucet: Reassemble the faucet in reverse order. Use plumber’s tape on threaded parts for a good seal.
8. Turn Water Back On: Restore the water supply and test the faucet. Ensure there are no leaks and the handle operates smoothly.
9. Check for Leaks: After reassembly, turn on the water and check for leaks. If it still leaks, additional tightening or part replacements might be necessary.

Call to Action (CTA):

Ran into problems while fixing your faucet? Don’t worry, we’re here to help! Call us at Thunderwood Repairs LLC, your Baton Rouge handyman, and we’ll take care of your plumbing needs. Your home, our expertise!

Remember, DIY projects like fixing a leaky faucet can enhance your home maintenance skills and save you money. However, if you encounter any complex issues or need professional assistance, Thunderwood Repairs LLC is just a call away!